xSonic SS60 Tilted Element Transducer

The SS60 is the stainless-steel version of our popular, B60, Tilted Element™ transducer. This product provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam returns crisp echoes for more-accurate depth readings. For hulls with a minimal deadrise angle, it is also available without tilt. The nearly-flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. The SS60 is currently being used by the US Coast Guard.

Tilted Transducers are available as follows:

• 0 degrees (for 0° to 14° hull deadrise)
• 12 degrees (for 8° to 15° hull deadrise)
• 20 degrees (for 16° to 24° hull deadrise)

Key Features

• Engineered for center-console and trailered boats
• Low-profile protrusion below the hull
• No affect on your boats running performance
• Arrow on cap points toward keel when installed
• Built-in temperature sensor
• Boat Size: Up to 8 m (25’)
• 0°, 12°, or 20° Tilt
• Stainless steel transducer housing

In the Box

xSonic SS60 Transducer with 10m cable