Navico Fuel Flow Sensor

For Simrad & Lowrance

The Fuel Flow Sensor tracks engine fuel flow, fuel used, trip fuel used and seasonal fuel used ─ sharing the information with any compatible display unit connected to the NMEA 2000® network. With a speed source in the network, the Fuel Flow Sensor can also calculate fuel economy.

Fuel Flow Sensor Gasoline only. One required per engine. Up to 3 engines supported.

Outputs:

• Fuel Flow
• Tank Fuel Used
• Trip Fuel Used
• Seasonal Fuel Used

Please check compatibility with your engine manufacturer before proceeding with an order.

Key Features

• Includes NMEA 2000 T Connector and two 1-inch (25 mm) hose clamps
• Displays current fuel rate or fuel flow
• Tracks fuel used, trip fuel used and seasonal fuel used
• Calculates fuel economy with networked speed source (GPS or Speed Sensor)
• For gasoline engines only. Does not work with diesel engines or any fuel system with a return fuel line or sump
• Cable Length: 10 Ft
• Fuel Line Diameter: 3/8" (9.5 mm) Inside Diameter
• Flow Rate Measured: Optimized for 0.6-45 Gal/hr but can measure outside these values
• Added Back Pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr
• Installation Location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line
• Fuel Type Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems.
• Hole required to route through a bulkhead: 22mm (7/8")

In the box

Fuel Flow Sensor, N2K T-Piece and 2 x 1" hose clamps