B&G T3 Hydraulic Ram 24V

RAM T3 Hydraulic Steering Systems combine a hydraulic cylinder with clutch, reversing pump and reservoir in a compact installation. A solenoid clutch is engaged to extend or retract the rod. The cylinder and its mounting are protected by integral relief valves. Overall adjustment is incorporated into the stroke of the cylinder. Nominal cylinder size and pump flow are indicated on the rating plate. Check the voltage shown is correct for the output of your autopilot.

T3 drives have a separate hydraulic pump to allow for greater mounting flexibility on this larger cylinder. Always remember to use the fully laden displacement of your boat when selecting a pilot. Typically a yacht fully provisioned with the water and fuel tanks full, can be as much as 20% above the designed displacement. If your boat falls between two pilot types, choose the larger pilot type - an under rated pilot may not be able to perform adequately when you need it most.

If you are using a Ram, Rotary drive or existing drive unit from another manufacturer, these will, in most cases, be compatible with Simrad/B&G units. If in doubt, please contact us.

Key Features