Airmar B164-0° 1kW 50/200kHz Tilted Transducer

(Depth & Temp) MIX & MATCH 

Step up to a 1kW—Without a Fairing! Airmar has taken our innovative Tilted Element™ technology to a higher power. The 1kW, flush-mount, Tilted Element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot have a High-Performance Fairing. The flush-mounted, bronze housing protrudes less than 6.35 mm (0.25”) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with this 1kW, Tilted Element transducer.

Tilted Transducers are available as follows:

• 0 degrees (for 0° to 14° hull deadrise)
• 12 degrees (for 8° to 15° hull deadrise)
• 20 degrees (for 16° to 24° hull deadrise)

Key Features

• 1 kW power, 50/200 kHz multiple-ceramics
• Engineered for center-console and trailered boats
• Low-profile protrusion below the hull
• No affect on your boats running performance
• Interfaces to any 600 W or 1 kW echosounder
• Bronze transducer housing
• Depth and fast-response water-temperature sensor
• Boat Size: 8 m to 11 m (25’ to 35’)
• optional 0°, 12°, or 20° Tilt

In the Box

B164 Transducer 'Mix & Match' with 2m cable (hardwired at transducer) and chosen adapter cable (See options)